Panasonic AG-AC7P - Manual (Page 66)

66
VQT3Q78
Advanced
Recording
(Advanced)
7
Recording with manual
focus
Perform focus adjustment using the focus ring.
If auto focusing is difficult due to the conditions, then use manual focus.
¬ Change the mode to or .
(The manual focus setting is retained when you change between motion picture recording
mode and still picture recording mode.)
Set the iA/MANUAL/FOCUS switch to manual focus mode, then slide the
iA/MANUAL/FOCUS switch to FOCUS.
≥ MF appears on the screen.
A Rotate the focus ring to adjust the focus.
1
(When MF assist function is used)
Select the menu.
2
Adjust the focus by rotating
the focus ring.
B Part displayed in blue
The in-focus area is displayed in blue. The
normal screen returns approximately
2 seconds after you finish bringing the
subject into focus.
≥ When [MF ASSIST] is [OFF], the blue
area is not displayed.
≥ To restore auto focus, slide the iA/
MANUAL/FOCUS switch to FOCUS again
or set the iA/MANUAL/FOCUS switch to
intelligent auto mode.
≥ The blue display does not appear on the
images actually recorded.
 
MANUAL
FOCUS
: [RECORD SETUP] #
[MF ASSIST] # [ON]
MENU
F
MF MF
IRIS SHTR WB
AG-AC7P-VQT3Q78_mst.book 66 ページ ２０１１年５月１８日 水曜日 午後１時４０分