Connecting with a hdmi cable, Connecting with the component cable – Panasonic AG-AC7P User Manual
Page 81
81
VQT3Q78
Select the desired method of HDMI output.
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080i] or [480p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ Image will not display on TV for a few seconds in the following cases.
j When switching between scenes recorded using [HA], [HG], [HX] or [HE] and scenes
recorded using [SA] or [SX] in playback mode
Component output setting can be changed.
Connecting with a HDMI cable
: [SETUP]
# [HDMI RESOLUTION] # [AUTO]/[1080i]/[480p]
Connecting with the component cable
: [SETUP]
# [COMPONENT OUT] # desired setting
[480i]:
When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)
[1080i]:
When connecting to the component terminal on the TV compatible with
1080i.
(Playback is in high definition quality.)
MENU
MENU
AG-AC7P-VQT3Q78_mst.book 81 ページ ２０１１年５月１８日 水曜日 午後１時４０分