Panasonic AG-AC7P - Manual (Page 94)

94
VQT3Q78
Problem Check points
The remaining time
indication or the
elapsed time
indication is not
shown. ≥ [DISPLAY] of the [SETUP] is [OFF]. ( l 40)
The unit arbitrarily
stops recording. ≥ Use an SD card that can be used for motion picture
recording. (l 21)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated
recording and deletion. Using the unit, format the SD
card. (l 43)
≥ If [AGS] is [ON], record in the normal horizontal
position or set [AGS] to [OFF]. (l 55)
Auto focus function
does not work. ≥ Set the iA/MANUAL/FOCUS switch to intelligent
auto mode.
≥ If you are trying to record a scene which is hard to
bring into focus in auto focus mode, use the manual
focus mode to adjust the focus. (l 35, 66)
Color balance of
images is strange
when recording in a
place such as a
gymnasium. ≥ In a place with multiple light sources, such as a
gymnasium or a hall, set the white balance setting to
(Indoor mode 2). If you cannot record clearly
with the (Indoor mode 2), set it to (Manual
adjustment mode). (l 64)
Any scenes/still
pictures cannot be
played back. ≥ Any scenes/still pictures where the thumbnails are
displayed as cannot be played back.
Although this unit is
correctly connected to
a TV, images cannot
be seen.
The images are
squeezed horizontally.
≥ Please read the operating instructions of your TV
and select the channel that matches the input used
for the connection.
≥ Change the [TV ASPECT] setting to match the
aspect ratio of the TV. (l 80)
≥ Change the setting of the unit depending on the
cable connecting to the TV. (l 81)
AG-AC7P-VQT3Q78_mst.book 94 ページ ２０１１年５月１８日 水曜日 午後１時４０分