Panasonic AG-AC7P - Manual (Page 57)

57
VQT3Q78
When recording, the input level from the built-in microphones and the external microphone
terminal can be adjusted.
≥ Change the mode to
.
≥ Set the iA/MANUAL/FOCUS switch to manual mode. ( l 63)
1 Select the menu.
2 (When [SETr ]/[SET] is selected)
Adjust the microphone input level
using the cursor button right or left.
≥ Select using the cursor button and press
the cursor button in the center to activate/
disactivate AGC. When AGC is activated, the
icon is surrounded by yellow and the amount
of sound distortion can be reduced. When
AGC is disactivated, natural recording can be
performed.
≥ Adjust the microphone input level so that the
last 2 bars of the gain value are not red.
(Otherwise, the sound is distorted.) Select a lower setting for microphone input level.
3 Select [ENTER] using the cursor button and press the button in the center to
determine the microphone input level, then select [EXIT] and press the
button in the center.
≥ (Microphone input level meter) is displayed on the screen.
≥ When changing to intelligent auto mode, the setting is fixed to [AUTO] and cannot be
changed.
≥ When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
≥ The microphone input level meter shows the larger of the inputs from the microphones.
≥ You cannot record with the audio completely muted.
[MIC LEVEL]
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]: AGC is activated, and the recording level is adjusted
automatically.
[SETr ]/[SET]: The desired recording level can be set.
MENU
A Left
B Right
C Microphone input level
AG-AC7P-VQT3Q78_mst.book 57 ページ ２０１１年５月１８日 水曜日 午後１時４０分