Pentax R-315(N) - Manual (Page 37)

4-3 Adjusting Illumination Brightness
Press [F5] while holding down the Illumination
key to access the screen for adjusting
illumination brightness.
Pressing the [F1] [ f ] will decrease brightness,
while pressing the [F2] [ e ] will increase
brightness.
Press [ENT] to exit adjustment mode and
return to the previous screen.
● Pressing the Illumination key views the F3-RETICLE, F4-LCD and F5-ILLU.
● Illumination brightness of the LCD screen and telescope reticle may be
adjusted as necessary at any time.
● Illumination brightness may be adjusted to any one of 10 levels.
4-4 Adjusting Reticle Illumination
Press [F3] while holding down the Illumination key to access the screen for
adjusting reticle illumination. The procedure to adjust the reticle illumination is the
same way as 4-3.
● Pressing the Illumination key views the F3-RETICLE, F4-LCD and F5-ILLU.
35
4 TURNING THE POWER ON
ENT
DOWN UP
0
5
10
ILLU INTENSITY ADJ
ENT
DOWN UP
0
10
10
ILLU INTENSITY ADJ
MEAS TARGET 0 SET DISP MODE
MODE A 15 ° C S0
H
. angle
H
. dst. 0 0 0 0 0
°
V
. dst. 0 0 0 0 0 0 0
°
4 0 " 3 9 ' 8 5
°
PENTAX R-300 (p20-52) 10/30/02 11:08 AM Page 35