5 angle measurement, 1 measuring an angle – Pentax R-315(N) User Manual
Page 38
5 ANGLE MEASUREMENT
5-1 Measuring an Angle
Aim at the first target, then press [F3] [0 SET]
twice in succession to reset the horizontal
angle to 0.
Aim at the second target, then read the
horizontal angle.
Pressing [F4] [DISP] displays the vertical
angle.
●
The [0 SET] key cannot reset the vertical angle to 0.
●
Pressing the [DISP] key cycles through the sets of display items:
“H.angle/H.dst./V. dst.”, “H angle/V.angle/S.dst.”, and “H.angle/V.
angle/H.dst./S.dst./V.dst.”.
●
Even though you turn the power off during a survey, the horizontal angle
displayed last time is saved, so that it is restored when the power is turned on
next time.
●
When the restored horizontal angle is not necessary, reset it to 0.
36
5 ANGLE MEASUREMENT
MODE A
15
°
C
S0
H
. angle
0 0 "
0 0 '
0
°
H
. dst.
V
. dst.
MEAS TARGET 0 SET
DISP
MODE
MODE A
15
°
C
S0
H
. angle
2 0 "
3 0 '
6 0
°
H
. dst.
V
. dst.
MEAS TARGET 0 SET
DISP
MODE
MODE A
15
°
C
S0
H
. angle
2 0 "
3 0 '
6 0
°
V
. angle
4 0 "
0 5 '
8 7
°
S
. dst.
MEAS TARGET 0 SET
DISP
MODE
PENTAX R-300 (p20-52) 10/30/02 11:08 AM Page 36