Pentax R-315(N) - Manual (Page 56)

54
8 INITIAL SETTING
8-4 Entering the Mode for Initial Setting 4
Press the [POWER] key while holding [F4]
key down to access the screen for Initial
setting 4.
● Select the item of interest in the same way as in the mode for Initial setting 1.
8-5 Entering the Mode for Initial Setting 5
Press the [POWER] key while holding [F5]
key down to access the screen for Initial
setting 5.
● Select the item of interest in the same way as in the mode for Initial setting 1.
● Pressing [F2] [ ] scrolls the screen down five items; pressing [F1] [ ] scrolls
it up five items.
SELECT
SET 4
1.TEMP UNIT :
°
C
2.PRESS UNIT : hPa
3.DIST. UNIT : m
4.ANG. UNIT : DEG
SELECT
SET 5
1.BAUD RATE : 1200
2.DATA LENGTH : 8
3.PARITY BITS
: NIL
4.STOP BITS : 1
5.SIGNAL CONTROL : ON
PENTAX R-300 (p53-64) 10/30/02 11:13 AM Page 54