Pentax R-315(N) - Manual (Page 52)

7-3 Changing the Atmospheric Pressure
The atmospheric pressure setting can be changed only when “Atmospheric
Correction” has been set to “ATM INPUT” in “Initial Setting 1”.
Example: Setting the pressure to 900 hPa
Press [F4] [CORR] in mode B.
(If the instrument is in mode A, press [F5]
[MODE] to enter mode B.)
Press [F4] [ h ] to move the cursor to
“4.PRESS” and press the [F5] [SELECT] to
enable the temperature to be changed.
Clear the exiting values by pressing [CLEAR]
key.
Input 900 by pressing the numeric keys.
50
7 CORRECTION MODE
SELECT
CORRECTION
1.PRISM CONST 0mm
2.SHEET CONST 0mm
3.TEMP : +15
°
C
4.PRESS : 1013hPa
5.ppm 0ppm
CORRECTION
1.PRISM CONST 0mm
2.SHEET CONST 0mm
3.TEMP : +15
°
C
4.PRESS : 1013hPa
5.ppm 0ppm
SELECT
CORRECTION
1.PRISM CONST 0mm
2.SHEET CONST 0mm
3.TEMP : +15
°
C
4.PRESS : 0900hPa
5.ppm 0ppm
CLEAR
PENTAX R-300 (p20-52) 10/30/02 11:08 AM Page 50