Palsonic TFTV930 - Manual (Page 12)

Connections
(continued)
10
Connect a VCR
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted
into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
Cautions Before Connecting
Video
cable
S-VIDEO IN /AV1 INPUT /AV2 INPUT
VCR, DVD player, etc.
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
How to connect:
Note:
For better video, you can use the S-video terminal if your source supports it.
The S-video terminal is prior to Video terminal when they are connected at the
same time. To use Video terminal, you should disconnect S-video.
To play VCR
1. Turn on your LCD TV, press Source button on the remote control.
2 Press CH+ or CH- to select Video1 (AV1 IN) and press Enter to confirm.
3. Turn on your VCR , insert a video tape and press the Play button.
Source Select
VGA
DVI
RF
Video1
Video2
YPbPr1
YPbPr2
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R)
W
Y
R
Bottom view
Audio
cable
or
AV OUT
AUDIO AUDIO