Important safety precautions – Palsonic TFTV930 User Manual

Page 5

Advertising
background image

Important Safety Precautions

(continued)

3

22. Power source --- This product is intended to be supplied by a listed power supply indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer
or local power company. For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable
system. This will prevent damage to the product due to lightning and power line surges. When the unit
has to be used with another power supply voltage, the power cable must be changed. Consult your
product dealer. The socket outlet should be installed near the equipment and easily accessible. Use
only the power cord designated by our dealer to ensure safety and EMC. When connecting other
products such as VCRs and personal computers, you should turn off the power of the unit for protection
against electric shock.

23. Panel protection --- The LCD panel used in this product is made of
glass. Therefore, it can break when the product is dropped or impacted
upon by other objects. Be careful not to be injured by broken glass pieces
in case the LCD panel breaks.

24. Pixel defect --- The LCD panel is a very high technology product, giving you finely detailed pictures.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.

An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or
where it can collide with such power lines or circuits. When
installing an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits, as
contact with them might be fatal.

Advertising