Palsonic TFTV930 - Manual (Page 23)

Selecting the Channels
21
Press the number buttons to go directly to a channel.
To select a one-digit channel: press the 0-9 number buttons directly.
To select a two-digit channel: press -/-- and display -- , then input the number.
Note:
Be sure to enter the channel within 3 seconds.
When you use the number buttons, you can directly select channels that were erased.
Press the CH+ or CH- to change channels.
When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the
unit has memorised.
You will not see channels that were erased.
Press this button to switch between the current channel and the last viewed channel.
Direct Accessing Channels
Using the Channel Buttons (CH+ or CH-)
Using the Button