Palsonic TFTV930 - Manual (Page 14)

Connections
(continued)
12
Connect a DVD Player (or Set-Top Box)
How to connect a DVD Player (or Set-Top Box) using Component Video Connections:
Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Pb, Pr output jacks on the DVD player
(or Set-Top Box).
Connect the Audio cable between the AUDIO input jacks on the unit and AUDIO output jacks on the DVD player
(or Set-Top Box).
To play DVD or Set-Top Box
1. Turn on your LCD TV , press Source button on the remote control.
2. Press CH+ or CH- to select YPbPr1, or YPbPr2.
3. Press Enter to confirm.
4. Turn on your DVD player (or Set-Top Box) .
Note:
The Y, Pb, Pr outputs on your DVD player are sometimes labelled Y, Cb, Cr or Y, U, V. If so, connect the cables
to like colours.
Source Select
VGA
DVI
RF
Video1
Video2
YPbPr1
YPbPr2
DVD player, Set-top Box etc.
White (audio L)
Red (audio R, Pr/Cr)
Green (Y)
Blue (Pb/Cb)
Y
Pb
Pr
AUDIO R
AUDIO L
Video
cable Audio
cable
Video
cable
Audio
cable
Side view