Palsonic TFTV930 - Manual (Page 15)

Connections
(continued)
13
Connect a DTV receiver
AUDIO
DVI-D
AUDIO
D-Sub
Side view
How to connect:
1. Connect the cable or antenna to the antenna input jack on the DTV receiver.
2. Connect the DVI cable between the DVI input interface on the unit and DVI
output interface on the DTV receiver.
3. Connect the Audio cable between the AUDIO input jack on the unit and AUDIO
output jacks on the DTV receiver.
To Watch DTV
1. Turn on your LCD TV, press Source button on the remote control.
2. Press CH+ or CH- to select DVI.
3. Press Enter to confirm.
4. Turn on your DTV receiver.
DTV receiver, etc.
Source Select
VGA
DVI
RF
Video1
Video2
YPbPr1
YPbPr2
DVI
cable
Audio
cable