PictureTel III ISA - Manual (Page 36)

3-2 C HAPTER 3: 3C OM I NSTALLATION W IZARD
Configuring the NIC
The NIC Configuration Settings screen appears, as shown in
Figure 3-2 . The list box displays recommended configuration
settings for the NIC. You can either accept the recommended
settings or change one or more to suit your operating
environment.
Figure 3-2 NIC Configuration Settings Screen
For Windows 95 non–Plug and Play PCs, make sure that the I/O
Base Address value shown in the list box under Current Value is
the same value that you wrote down in
“Configuring the NIC ” in
Chapter 2 . Also make sure that the Interrupt Request Level value is
one of the available values that you wrote down in “Performing
the Preinstallation Procedure ” in Chapter 2 .
To Accept Configuration Settings
Follow these steps to accept the recommended configuration
settings:
1 Click Next.
2 Go to “Testing the NIC and the Network Connection ” later
in this chapter.