PictureTel III ISA - Manual (Page 44)

3-10 C HAPTER 3: 3C OM I NSTALLATION W IZARD
Identifying Your PC on the Network
When you click Next in the previous section, the Network
Identification screen appears, as shown in
Figure 3-10 . This
screen enables you to identify your PC on the network. Contact
your network administrator if you do not have information to
enter in these fields.
Figure 3-10 Network Identification Screen
Follow these steps to enter field data:
1 Type the name of your computer.
There are many PCs and other devices on a network—each one
must be uniquely identified on the network. This name identifies
your PC on the network. The name can have up to 15 characters.
Spaces are not allowed; however, you can use hyphens.
2 Type your workgroup name.
This name identifies the group to which your PC belongs to and
is likely to communicate with. This group will include most of
the network resources that you use. This name can have up
to 15 characters. See your network administrator for more
information.
3 Click Next.
The next step is to configure DynamicAccess™ software.