PictureTel III ISA - Manual (Page 58)

4-4 C HAPTER 4: S OFTWARE I NSTALLATION AND C ONFIGURATION U NDER W INDOWS 3. X
Removing NIC Software
EtherDisk diskette 2 includes an uninstallation program to remove
the 3C509B NIC software.
To run the uninstallation program, at the DOS prompt, Enter:
un3c509.exe
The NIC software is removed from your PC.
Configuring the NIC
This section describes how to configure the 3C509B NIC after you
install it in your PC. If only one 3C509B NIC is installed and you
are running Novell NetWare, use the AutoLink program to
configure the NIC and load the appropriate driver, as described
earlier in this chapter.
To configure the 3C509B NIC, follow these steps:
1 Install the NIC (see Chapter 1 ) and the network driver
(earlier in this chapter).
2 Reboot to DOS.
3 Insert EtherDisk diskette 2 in drive A.
4 Run the installation program. Enter:
a:install
The main menu is displayed, as shown in Figure 4-1 .
5 Select Configuration and Diagnostic Program.
If you have more than one NIC installed in the PC, select the NIC
you want to configure. Tab to the Select button and press Enter.
6 Select Configure NIC and press Enter.
The NIC Configuration screen is displayed, as shown in Figure 4-2 .
Windows 95 NDIS 2 16-bit
network driver W95NDIS2.TXT ELNK3.DOS
NetWare Client 32 CLIENT32.TXT 3C5X9.LAN
NetWare 3.12 Server NETWARE.411 3C5X9.LAN
NetWare 4 Server NETWARE.411 3C5X9.LAN
NetWare OS/2 NWOS2ODI.TXT 3C5X9.SYS
Packet driver NOSs PACKET.TXT 3C5X9PD.COM
Table 4-2 Network Driver Text File Names (continued)
Network
Operating System
Text File Name Network Driver Name