To specify an ip address manually, To specify an ip address manually 3-7 – PictureTel III ISA User Manual
Page 41
Configuring TCP/IP Under Windows 95
3-7
To Specify an IP Address Manually
Follow these steps to specify an IP address manually:
1
Select the Specify an IP address manually radio button.
2
Click Next.
The Specify an IP Address screen appears, as shown in
.
.
Figure 3-7 Specify an IP Address Screen
3
Enter the IP address.
4
Enter the subnet mask.
5
Enter the new gateway address.
At least one gateway must appear in the Gateways list box before
you can advance to the next screen.
6
Click Add New Gateway to add the new gateway
configuration.
The gateway is listed in the Gateways list box.
7
Click Test IP Connection to verify that the gateway
connection is functioning.
While the test is running, a progress bar indicates test progress.
If a test fails, a message indicates the error type. Click the Help
button in the error message screen to obtain more information.
provides additional troubleshooting help.
A message confirms that the IP address is valid and functioning.
8
Click Next.
The next step is to configure DNS.