Paradyne 6342 - Manual (Page 100)

A. Command Line Interface
A-26 November 2003 6300-A2-GB20-10
show dhcp relay
Minimum Access Level: Operator
Command Mode: Standard
Displays the DHCP relay agent’s current status and configuration.
Sample show dhcp relay display:
DHCP relay – {enabled | disabled }
DHCP relay – server ip-addr: x.x.x.x
Maximum number of DHCP relay clients: xxx
show dhcp server
Minimum Access Level: Operator
Command Mode: Standard
Displays the DHCP relay’s current status and configuration.
Sample show dhcp server display:
DHCP server {enabled | disabled }
DHCP server host name: name
DHCP server address range: lower ip-addr x.x.x.x
upper ip-addr x.x.x.x
DHCP server - subnet mask option: x.x.x.x
DHCP server - router option: x.x.x.x
DHCP server - DNS name server option: x.x.x.x[, x.x.x.x]
DHCP server - lease time: minimum xxxx minutes
maximum xxxx minutes
DHCP server bindings:
ip-addr MAC addr Lease time(min)
--------------- ----------------- ---------------
x.x.x.x xx:xx:xx:xx:xx:xx xxxx
Table A-17. Show Commands (3 of 10)