Paradyne 6342 - Manual (Page 49)

4. DSL Router Configuration Examples
6300-A2-GB20-10 November 2003 4-7
NOTES:
— The ip routing enable command is only required when using
firmware version 4.2.5 or higher.
— FUNI/MPOA (1483 routed) link encapsulation can be used with this
configuration and the DSL card Models 8304, 8314, 8344, and 8374. Link
encapsulation is configured on the DSL port. This link encapsulation must
match the core network encapsulation type. The ip route create
upstream
command is not necessary when using FUNI/MPOA link
encapsulation.
— NAPT is limited to one subnet.