Paradyne 6342 - Manual (Page 114)

B. Configuration Defaults and Command Line Shortcuts
B-6 November 2003 6300-A2-GB20-10
show log [ number of entries]
show nat { basic | napt}
show pppoe
show spanning-tree
show statistics [dsl1 | eth1 | ip | bridge | pppoe| tftp]
show syslog
show system
show telnet
spanning-tree {enable | disable}
syslog {enable | disable}
syslog ip ip-addr [mgt | srvc]
syslog level {emer | err | norm | info | debug}
syslog port port
system identity identity
telnet { enable | disable}
telnet keep-alive {enable | disable}
telnet keep-alive interval [time]
telnet keep-alive timeout [time]
telnet login { enable | disable}
telnet name create {admin | operator} login-id password
telnet name delete {admin | operator} login-id
telnet timeout [time]
traceroute dest-ip [ -x source-ip] [-l bytes] -w time ] [-h hops] [-i {eth1 | dsl1}]
trap { enable | disable} name of trap
Table B-2. Command Line Shortcuts (4 of 4)
Command