Paradyne 6342 - Manual (Page 112)

B. Configuration Defaults and Command Line Shortcuts
B-4 November 2003 6300-A2-GB20-10
configure {factory | terminal}
console {enable | disable}
delete {dsl1[:ifn] | eth1[:ifn]}
dhcp relay {enable | disable}
dhcp relay address ip-addr
dhcp relay max [number]
dhcp server {enable | disable}
dhcp server addresses lower-ip upper-ip [ip-mask]
dhcp server leasetime min-time max-time
dhcp server name name
dhcp server nameserver ip-addr
dhcp server router ip-addr
download {dsl1[:ifn] | eth1[:ifn]} server-ip filename
exit
frame [dix | 802.3]
help
ifn address {dsl1[:ifn] | eth1[:ifn]} ip-addr ip-mask [primary]
ifn address dsl1 unnumbered
ifn {dsl1[:ifn] | eth1[:ifn]} primary
ip multicast {enable | disable}
ip route create dest-ip dest-mask [ next-hop-ip]
ip route create dest-ip dest-mask remote
ip route create upstream eth1[:ifn] next-hop-ip
ip route delete dest-ip dest mask
ip route delete upstream eth1[:ifn]
ip route purge
ip routing {enable | disable}
list [config]
logout
name name
nat basic address ip-addr [ip-mask]
nat basic delete [ private-ip | lower-private-ip upper-private-ip ]
Table B-2. Command Line Shortcuts (2 of 4)
Command