Princeton SP-88 - Manual (Page 17)

VOICE L OCTAVE
In the voice L octave setting, LCD displays the
current octave value. Use the dial, the [+]
button or the [-] button to adjust the voice L
octave value. This function can apply to the
right area of keyboard. The parameter range -1
to1. The default value is 0.
Press the [+] button and the [-] button
simultaneously will set the octave value to the
default one.
It can function after pressing [LOWER VOICE]
button.
PITCH BEND RANGE
This function allows you to set the pitch bend
range. In the Pitch Bend Range setting, LCD
displays the current pitchbend range value.
Use the dial, the [+] button or the [-] button to
adjust its range. This function can apply to the
right area of keyboard. The parameter range
-12 to 12 semitones. The default value is ±2
semitones.Press the [+] button and the [-] button
simultaneously will set the range value to the
default.
SPLIT POINT
In the split point setting, the LCD displays the
current split point value. Use the dial, the [+]
button or the [-] button as well as the keyboard
to change the split point. The parameter ranges
from 1 to 88. The default value is
034. This function allows you to play different
voices with your left and right hands by setting
a split point. With the style playing mode, you
can play chords below the split point and play
the melody part in the right area on the
keyboard.Press the [+] button and the [-] button
simultaneously to set the value to the default.
PEDAL ASSIGN
In the pedal assign setting, the LCD displays the
current pedal assign name. A total of 5 different
assigned pedal are available. Use the dial, the [+]
button or the [-] button to select the pedal assign.
The LCD displays Sustain Pedal
、Soft Pedal、
Start/Stop Pedal
、Tempo/tap Pedal、Memory
Select Pedal circularly. The default value is
Sustain Pedal.
MIDI
Press the [FUNCTION] button and select "Midi"
menu. Press the [NEXT] button, the LCD
displays transmit and receive. Use the dial, the
[+] button or the [-] button to select the Midi
sub-menu. The default one is Transmit. Press the
[NEXT] button to enter channel setting.
Transmit
Select Transmit sub-menu. Press the [NEXT]
button to enter Transmit channel setting,
The LCD displays the current channel value.
Use the dial, the [+] button or the [-] button to
change the channel value from 1 to 16 channels.
The default value is 001.
Receive
Select Receive sub-menu. Press the [NEXT]
button to enter Receive channel setting, The
LCD displays the current Receive value.
Use the dial, the [+] button or the [-] button to
change the channel value from 1 to 16, ALL
channels. The default value is ALL.
Mixer
Press the [FUNCTION] button and select
"MIXER"menu. Press the [NEXT] button. The
LCD displays Orchestra 1 VOL
、Orchestra 2
VOL
、Orchestra 3 VOL、Voice R1 Volume、
Voice R2Volume
、 Voice L Volume 、 Bass
Volume
、Drum Volume circularly. Use the dial,
the [+] button or the [-] button to select the
mixer sub-menu. Press the [NEXT] button to
enter the parameter setting.
Style
In the accompaniment-channel setting, the LCD
displays Orchestra 1 VOL
、Orchestra 2 VOL、
Orchestra 3 VOL
、Bass Volume、Drum
Volume value circularly. The respective default
values are 27
、27、27、28、28.
Set the value with the dial, the [+] and [-] button
from0 to 31.In this mode, press the [+] and the
[-]simultaneously to turn OFF the volume value .