Princeton SP-88 - Manual (Page 22)

Record start
Prepare to record
Select user song: Press the [RECORD] button.
The REC icon on LCD is illuminated. User Song
1 or User Song 2 is displayed on the lattice area.
Its cursor on the LCD is lit, then you can select it
with dial, the [+]/the [-] button.
Wait for record: Press the [RECORD] button
after choosing User Song 1 or User Song 2.Four
beats on the LCD flash simultaneously, which
indicates that the recording is waiting. You can
select desired recording track with the
[ACCOMP],[MELODY 1]-[MELODY 4]
buttons. Its cursor flashes once selected.
Note:
You can select simultaneously an ACCOMP
track & one MELODY track, but you are not
allowed to select 2 MELODY tracks at the same
time.
MELODY 1 is automatically set to current track
while it is in waiting mode. If the first MELODY
includes data, the second MELODY is set to
record automatically.
If the track includes data, its relevant cursor on
LCD is lit. Press the track button while it's in
waiting mode. Then, the cursor on the LCD turns
off. Press the track button again. Its cursor
flashes, indicating that the track is available for
recording.
Start to record
You can start to record by playing the keyboard
and pressing the [START/STOP]button. Four
beats flash in turn and follow the current tempo.
The recorded data in current track will be
covered with new data during recording. During
recording, you can start or stop the style by
pressing the [START/STOP] button two times.
Record stop
Stop Automatically
Press the [ENDING] button when the style is
playing during recording. It will stop recording
automatically after the ending playing is over.
If the capacity is full during recording, it will
stop recording automatically with displaying
"Full Record Data!" on LCD .
Stop Manually
Press the [RECORD] button again during
recording to stop recording immediately. The
cursor of the recorded track is lightened.
Press the [DEMO] button in recording to stop
recording and enter the DEMO mode. The data
recorded will not be lost. The cursor of the
recorded track is lightened.
Record play
Song select
Press the [PLAY] button. User song 1 or user
song 2 is displayed on the LCD. You can select
the desired song with the dial, the [+] & the[-]
button.
Track select
Select the desired tracks with the [MELODY
1]-[MELODY 4] and the [ACCOMP] button
after having selected the song. The lightened
cursor indicates the track is going to be played.
If the cursor is not lit, it indicates the track is
empty .
Song play
Press the [PLAY] button to play the song after
selecting tracks. Press it again to stop playing.
If the user song is empty, "Song Empty" displays
temporarily on the LCD.
If no track is selected, "Select a Track"
displays temporarily on the LCD.