Princeton SP-88 - Manual (Page 18)

Keyboard
In the keyboard setting, the LCD displays Voice
R1 Volume
、Voice R2 Volume、Voice L Volume
value circularly. The default value is 27
、28、
12 respectively. Set the value with the dial, the
[+] button or the[-] button from 0 to 31. In this
mode, press the [+] and the [-] simultaneously to
turn off the volume value. Press them again to
resume the default value.
Language
Select language menu after entering the
function menu, press the [NEXT] button to
enter language setting mode. Use the dial,
the [+] button or the [-] button to select
English or Chinese language.
The default value is English. The language
setting would not be changed when the power
is off. When Chinese is selected before
switching off the piano, the language is set to
Chinese automatically after turning on the
piano.
Press the [+] and the [-] simultaneously while
power is on, the language will be set as the
default one.
Memory
Memory allows you to save virtually all panel
settings to a registration memory setting, and
then instantly recall your custom panel settings
by pressing a single button.
Bank
Memory provides up to 48 complete control
panel setups (8banks,6 setups each) that can
be recalled instantly during your performance.
The default value is bank 1.Press [BANK]
button to select your desired bank. The LCD
displays BANK number. Use
the bank button again, dial, the [+] button or
the [-] button to cycle select the bank (1-8).
The LCD displays your selected bank number.
Store and load
Press [STORE] and hold the button, press M1
(or M2-M6) at the same timee. The data will be
stored to the M1 (M2~M6), the LCD displays
the memory number "Bank 1 Memory 1".
Press [STORE] and [M1] simultaneously while
the piano powers on, the memory data will be
set as the default value.
Note:
If current data is not the same as the current
memory data, the corresponding memory icon
on the LCD will be darkened.
Note:
The memory data can be reserved even if the
piano is switched off. To clear all memory datas
and restore the default setting, press the
[STORE] ,[M1] simultaneously before turning
on the piano. Pressing the [+],[-] button
simultaneously can also clear the memory data,
but it will clear all other saved setting such as
recorded data as well.
Date stored in memory
Voice Data
Voice On/Off: Voice R1, Voice R2, and Voice
Lower
Voice Number: Voice R1, Voice R2, and Voice
Lower
Effect On/Off: DSP, Touch, Sustain, Harmony
Function: Digital Effect Parameter, Utility
Parameter (except Split Point)
Transpose : Transposer Value
ACCOMP Data
Style Number, Tempo Parameter, A.B.C On/Off,
Split Point, ACCOMP Volume, Normal/Variation
Status.
Other Data
Midi Parameters & Mixer Parameters in
Function.