Panasonic DMC-LS75 - Manual (Page 38)

38
VQT1C84
Advanced-Shooting
Recording a picture with the
camera held high above your
head (High angle mode)
The LCD monitor becomes easier to see
when the camera is held in the following
position. This is useful when you cannot
get close to the subject because there is a
person in the way.
Press [HIGH ANGLE] A for 1
second to display the High angle
mode icon [
] B.
• High angle mode is activated. The
LCD monitor becomes brighter and
easier to see when the camera is held
away from you. (However it becomes
more diffi cult to see when looked at
straight on.)
■ Cancelling High angle mode
Press and hold [HIGH ANGLE] again for 1
second or turn the camera off.
• High Angle mode is also cancelled if
power save mode is activated.
• Pictures are displayed on the LCD
monitor with increased brightness in High
angle mode. Therefore, some subjects
may look different on the LCD monitor.
However, this does not affect the
recorded pictures.
• If the LCD monitor screen is hard to see
because of light from the sun etc. shining
on it, block the light with your hands.
• High angle mode is not activated in the
following cases:
– In simple mode [
]
– In playback mode
– In print mode [
]
– While the menu screen is displayed
– During Review
A
HIGH
ANGLE
19
19
7 M
1
7 M
1
HIGH
ANGLE
B
FOR 1 SEC.
FOR 1 SEC.
ON: PRESS
OFF: PRESS