Panasonic DMC-LS75 - Manual (Page 84)

84
VQT1C84
Connecting to other equipment
PC when you use Windows98/98SE/Me.
http://www.apple.com/support/quicktime/
• The software is a standard Macintosh
feature.
■ Folder Composition
Folders appear as follows.
1
Folder number
2
File number
3
JPG : Pictures
MOV : Motion pictures
MISC : Folder containing fi les with DPOF
settings.
• This unit stores up to 999 picture fi les in
each folder. A new folder is created after
this maximum is reached.
• To reset fi le and folder numbers, use
[NO.RESET] in the setup menu. (P21)
■ Conditions under which a different
folder number is used
In the following cases, the picture is
not recorded in the same folder as the
previously recorded picture. It is recorded
in a folder with a new number.
• The folder containing the picture you
just shot had a fi le numbered 999 in it
(example: P1000999.JPG).
• When the card just recorded to contains,
for example, a folder with the number
100 (100_PANA) in it and that card is
removed and replaced with a card that
has a folder with the number 100 in it
recorded by a camera from a different
maker (100XXXXX, with XXXXX being
the name of the maker) and then a
picture is recorded.
• You start shooting again after using
[NO.RESET] in the setup menu (P21).
(It is recorded to a new folder that has
a number following on from the one
previous. You can also reset the folder
number to 100 by using [NO.RESET]
immediately after formatting the card
when there are no folders or pictures on
the card.)
■ Connection in the PTP mode
Windows XP/Mac OS X users can
establish connection in the PTP mode by
setting the camera in print mode [
] and
connecting it to their PC.
• You can only load pictures from the
camera and cannot write them on the
card or delete them.
• When there are 1000 or more pictures on
a card, the pictures may not be imported.
D C I M
M I S C
100_PANA
101_PANA
999_PANA
P1000001.JPG
P1000002.JPG
P1000999.JPG
100_PANA
1
2 3
• Built-in
memory
• Card