Connecting to a pc, Ba c – Panasonic DMC-LS75 User Manual

Page 83

Advertising
background image

83

VQT1C84

Connecting to other equipment

Connecting to a PC

• By connecting the camera to a computer,

you can upload your pictures, then
use the software on the included
CD-ROM ([LUMIX Simple Viewer]
and [PHOTOfunSTUDIO-viewer-] for
Windows

®

) to print or send your images

by e-mail.

• If you use Windows 98/98SE, install

the USB driver and then connect the
camera to the computer.

• For details about installing [LUMIX

Simple Viewer] or [PHOTOfunSTUDIO-
viewer-] etc., refer to the separate
operating instructions for PC connection.

A

: AC adaptor (DMW-AC6; optional)

• Use batteries with suffi cient battery

power (P23) or the AC adaptor (DMW-
AC6; optional).

• Make sure this unit is off before

connecting or disconnecting the AC
adaptor (DMW-AC6; optional).

B

: USB connection cable (supplied)

C

: This message appears during data

transfer.

D

: Check the facing of the connector and

push straight in.

• Set the camera’s mode dial to a mode

other than Print mode [

].

1 Turn on the camera and the PC.
2 Connect the camera to a PC via

the USB connection cable B
(supplied).

• Connect the USB connection cable with

the [

c] mark facing the [q] mark on

the [DIGITAL] socket.

• Hold D and then insert or pull the USB

connection cable straight. Do not try
to force the connector in backwards or
sideways. This can damage this unit and
the equipment you are connecting.

[Windows]
The drive appears on the [My Computer]
folder.
• If it is the fi rst time you are connecting

the camera to a PC, the required driver is
installed automatically so that the camera
can be recognised by the Windows Plug
and Play, then it appears on the [My
Computer] folder.

[Macintosh]
The drive is displayed on the screen.
• The drive is displayed as [LUMIX] when

you connect the camera with no card
inserted.

• The drive is displayed as [NO NAME] or

[Untitled] when you connect the camera
with a card inserted.

Motion picture playback on a PC

Use “QuickTime” (for Windows 2000/XP) in
the supplied CD-ROM when you play back
motion pictures recorded on this camera
on your PC.
• Download [QuickTime6.5.2 for PC] from

the following website and install it on your

B

A

C

DIGITAL

V.OUT

DC IN

3V

D

ACCESS

Advertising
This manual is related to the following products: