Panasonic DMC-LS75 - Manual (Page 63)

63
VQT1C84
Advanced-Shooting
■ About 1-area-focusing (High speed)
• You can focus on the subject more
quickly than other AF modes.
• Pictures may become still in the condition
they were in before the subject was
focused when you press the shutter
button halfway. However, it is not a
malfunction.
• When using the
digital zoom or when
you take pictures in
dark places, the AF
area is displayed
on the centre of the
screen with a size wider than usual.
• When multiple AF areas (max. 5 areas)
light at the same time, the camera is
focusing on all the AF areas. The focus
position is not predetermined because
it is set to the position the camera
automatically determines at the time of
focusing. If you want to determine the
focus position to take pictures, switch the
AF mode to 1-area-focusing or 1-area-
focusing (high speed) mode.
• In 5-area focusing mode, AF areas are
not displayed until the camera focused
on a subject.
• The AF mode cannot be set in simple
mode [ ] or [FIREWORKS] in scene
mode.
[STABILIZER]
This feature detects jitter and
corrects for it
MODE1
(7) The stabilizer operates
continuously and can assist
during photo composition.
MODE2
(8) The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
OFF
(
)
When image stabilization is not
desired.
■ About demonstration of jitter/
movement detection screen
Press q to display [JITTER, SUBJ. MOVE
DEMO.] when the [STABILIZER] screen
is displayed. You cannot shoot while the
demonstration is on. Press
q again to stop
the demonstration.
A
Jitter indicator
B
Movement indicator
• The camera automatically detects
jittering and movement of the subject and
indicates them.
• The demonstrations are examples only.
• The automatic ISO sensitivity setting
using movement detection only works in
Intelligent ISO mode and the [SPORTS],
[BABY], and [PET] scene modes (P46).
MENU
SET
Press [ ] to display the [REC] mode menu and select the item to set. (P18)
A
B
JITTER, SUBJ. MOVE DEMO.
CANNOT BE DISPLAYED
IN REC MODE
EXIT