Panasonic DMC-LS75 - Manual (Page 49)

49
VQT1C84
Advanced-Shooting
Sunset mode
Use to take pictures of the sunset. Sunset
colour can be reproduced vividly.
• The fl ash setting is fi xed to Forced OFF
[ v].
• The setting on the AF assist lamp is
disabled.
• ISO sensitivity is fi xed to [ISO100].
• You cannot change the white balance setting.
Baby mode 1
Baby mode 2
Adjusts the exposure and tone to bring
out the healthy colour of your baby’s skin.
The fl ash will be weaker than normal if you
choose to use it.
You can set the birthdays of two babies
by using [BABY1] and [BABY2]. You can
display the set age when playing back
the pictures and imprint the age on the
recorded pictures with [DATE STAMP]
(P74).
• You can also use the [LUMIX Simple
Viewer] or [PHOTOfunSTUDIO-viewer-]
software on the included CD-ROM to
print your baby’s age. (For details, refer
to the separate operating instructions for
PC connection.)
■ Age display setting
• To show age, fi rst enter the birthday,
select [WITH AGE], and press [MENU/
SET].
■ Birthday setting
1 Select [BIRTHDAY SET.] and press
[MENU/SET].
2 [PLEASE SET THE BIRTHDAY OF THE
BABY] appears. Select year/month/day
with
w/q and change the date with e/r.
3 Press [MENU/SET] to exit.
• Focus range is 5 cm (Wide)/30 cm (Tele)
to Z.
• Sensitivity will be the same as when you
have set ISO LIMIT in Intelligent ISO
mode [
] (P44) to [ISO400].
• After turning on the camera in [BABY1]/
[BABY2] in scene mode, the age, current
date, and time appear for about 5
seconds at the bottom of the screen.
• Actual age displays depend on the
[LANGUAGE] setting.
• Check the clock and birthday settings if
the age shown is incorrect.
• Note that if you select [WITHOUT AGE],
age information is not recorded. The
information will not appear even if you
select [WITH AGE] after taking pictures.
• To reset the birthday setting, use
[RESET] in the [SETUP] menu. (P22)
• The digital zoom is fi xed to [OFF].
Pet mode
Suitable for taking pictures of your pet.
Keep a record of your pet’s development
by adding the date. You can display the set
age when playing back the pictures and
imprint the age on the recorded pictures
with [DATE STAMP] (P74).
• Displays and settings are the same as
for the baby modes. For details on how
to set age and birthday, see [BABY1]/
[BABY2].
• You can also use the [LUMIX Simple
Viewer] or [PHOTOfunSTUDIO-viewer-]
software on the included CD-ROM to
print the pet’s age. (For details, refer to
the separate operating instructions for
PC connection.)
MENU
SET
Press [ ] to display the [SCENE MODE] menu and select a scene mode. (P46)
1
2
MENU
1 BABY1
SELECT SET
WITH AGE
WITHOUT AGE
BIRTHDAY SET.
CANCEL