Panasonic WV-CW484 - Manual (Page 11)

11
q Power cable (12 V DC or 24 V AC)
Cautions:
1. Connect to 12 V DC (10.5 - 16 V) or
24 V AC (19.5 V - 28 V) class 2
power supply only. Make sure to
connect the grounding lead to the
GND terminal when the power is
supplied from a 24 V AC power
source.
2. To prevent fire or electric shock haz-
ard, use a UL listed cable (VW-1,
style 1007) for the Input Terminal.
w Video output cable with BNC connec-
tor
Connects with the video connector of the
monitor.
e Dome cover
r Focus lock lever (WV-CW484F,
WV-CW484S)
Fixes the focus position.
t Zoom lock lever (WV-CW484F,
WV-CW484S)
Fixes the zoom position.
y Tilting lock screw
Fixes the tilting position.
u Azimuth (Angle adjuster)
Shoots in a straight-angle field of view
when aiming at an object in a slanting
direction even if the tilt angle has been
set.
i Panning table
Adjusts the panning angle of the camera.
o Panning lock screw
Fixes the panning position.
!0 Camera lock screw
Fixes the camera and camera attach-
ment.
!1 Monitor output Jack (3.5 diam. mini
jack)
Connects the LCD monitor and such
devices with 3.5 diam. 2-pole L-type plug
for checking images.
!2 Optional heater connector (6 pin
female)
When an optional heater unit is installed
in the camera, the harness exiting from
the unit will be connected to this.
!3 LED indicator
Shows the ABF status.
!4 Operation buttons
!5 SET button [(SET), ABF2/MENU]
Activates an item selected in the setup
menu. Refer to p. 18 for details on the
[ABF2] button.
!4 DOWN button [(DOWN), ABF1]
Moves the cursor downward and selects
items in the setup SET UP menu.
!5 UP button (UP)
Moves the cursor upward and selects
items in the setup menu.
!6 LEFT button [(LEFT), NEAR]
Moves the cursor to the left, selects the
mode and adjusts some levels.
!7 RIGHT button [(RIGHT), NEAR]
Moves the cursor to the right, selects the
mode and adjusts some levels.