Panasonic WV-CW484 - Manual (Page 27)

27
About Setup Menus
Before operation, setup of this camera is required. On the setup menu, you can check current
settings and perform settings to meet requirements.
The following is an example of setup procedure when LANGUAGE is set to ENGLISH.
Settings items of the camera setup page
CAMERA Configure the settings relating to camera operations
CAMERA ID The camera title can be edited and displayed on the
screen.
ALC Configure the light control method.
SHUTTER Select the shutter speed.
AGC Select the method of the gain adjustment.
SENS UP Adjust the sensitivity.
SYNC Configure the method of the synchronization.
WHITE BAL Select the method of the white balance adjustment.
DNR Configure the settings for the DNR (Digital Noise
Reduction) function.
RESOLUTION Select a horizontal resolution mode.
BW MODE Configure the settings relating to the BW mode such
as the settings for switching between the color mode
and the BW mode.
PRIVACY ZONE It is possible to mask a designated zone and as a pri-
vacy zone.
EL-ZOOM Adjust the electronic zoom.
UPSIDE-DOWN Select the upside down positioning of camera picture.
STABILIZER Select "ON" or "OFF" to determine whether or not to
use the image stabilizer to prevent shaky images.
BACK-FOCUS Select the method of the flange-back (back focal)
length adjustment and adjust the flange-back (back
focal) length minutely.
31
32
33
34
34
35
35
38
38
38
39
40
40
40
41
Setup item Description
Reference
pages