Specifications – Panasonic WV-CW484 User Manual
Page 47
47
Specifications
General specifications
Power source and power
24 V AC 60 Hz, 11 W (With heater), 12 V DC 470 mA
consumption:
Ambient temperature:
–10 °C - +50 °C {14 °F to 122 °F}
–30 °C - +50 °C {–22 °F to 122 °F}*
Ambient humidity:
90 % or less
Water resistance:
IEC60529 (IP66, Against ingress of water with harmful effects
powerful jetting)** (Camera unit)
Dimensions:
ø154 mm (W) x 141.2 mm (H)
{ø6.06" (W) x 5.55" (H)} (excluding connectors/terminals)
Weight:
Camera: Approx. 1.3 k
g {2.87 lbs.}
Camera attachment: Approx. 100
g {0.22 lbs.}
* With Heater Unit WV-CW4H (option)
** Applicable only when the installation and waterproof process are done properly
Camera
Image sensor:
1/3" interline transfer CCD
Effective pixels:
768 (H) x 494 (V)
Scanning area:
4.8 mm (H) x 3.6 mm (V)
Scanning method:
2:1 interlace scan
Scanning frequency
Horizontal: 15.734 kHz
Vertical: 59.94 Hz
Resolution:
Horizontal 480 TV lines (C/L Normal), 540 TV lines typ., 520 TV
lines min. (C/L High), 570 TV lines (B/W)
Signal-to-noise ratio:
50 dB (Equivalent to AGC Off, weight On)
Dynamic range:
52 dB typ
Minimum illumination:
1.5 lx { x.xx footcandle} at F1.4 (C/L),
0.16 lx {x.xx footcandle} at F1.4 (B/W),
Video output:
VBS 1.0 V [P-P] NTSC composite 75
Ω/BNC connector
Lens mount:
CS-mount
Major items on menu setup (Factory default settings are underlined.)
Language:
English, French, German, Spanish, Italian, Russian, Japanese, or
Chinese
Camera ID:
Up to 16 characters
Light control
ALC
Super Dynamic 3:
ON or OFF
Electronic shutter speed:
OFF (1/60), 1/100, 1/250, 1/500, 1/1 000,1/2 000, 1/4 000,
1/10 000 s
AGC:
ON (HIGH/MID/LOW), or OFF
Sensitivity enhancement:
OFF, x2 AUTO, x4 AUTO, x6 AUTO, x10 AUTO, x2 FIX, x4 FIX,
x6 FIX, x10 FIX, x16 FIX, x32 FIX
Synchronization:
Multiplexed vertical drive (VD2), Line-locked, or Internal
White balance:
ATW1, ATW2, or AWC
Motion detection:
MODE1, MODE2, or OFF