Panasonic CW-XC244HU - Manual (Page 17)

—17—
5. Pull each Frame curtain fully to each window sash
track, and pull the bottom window sash down behind
the Top retainer bar until it meets.
6. Attach each Frame curtain the window sash by using
screws (Type C). (See Fig. 27)
7. Slide the unit into the cabinet. (See Fig. 28)
CAUTION: For security purpose, reinstall screws at
cabinet's sides.
8. Cut the Foam-strip to the proper length and insert
between the upper window sash and the lower
window sash. (See Fig. 29)
9. Attach the Window locking bracket with a screw
(Type C). (See Fig. 30)
10. Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the
cabinet. Push the grille in until it snaps into place.
(See Fig.31)
11. Lift the inlet grille and secure it with a screw (Type A)
through the front grille. (See Fig. 31)
12. Window installation of room air conditioner is now
completed.
Power Cord
Screw Screw
Window locking
bracket
Foam-Strip
Screw(Type C)
Figure 27
Figure 28
Figure 29
Figure 30
Figure 31
Figure 32