Pioneer 915 - Manual (Page 15)

Connecting up 04
15
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 4:
Connecting up
Making cable connections
Make sure not to bend the cables over the top
of this unit (as shown in the illustration). If this
happens, the magnetic field produced by the
transformers in this unit may cause a
humming noise from the speakers.
Important
• Before making or changing any
connections, switch off the power and
disconnect the power cord from the AC
outlet.
Analog audio cables
Use stereo RCA phono cables to connect
analog audio components. These cables are
typically red and white, and you should
connect the red plugs to R (right) terminals
and white plugs to L (left) terminals.
Digital audio cables
Commercially available coaxial digital audio
cables or optical cables should be used to
connect digital components to this receiver.
• When connecting optical cables, be
careful when inserting the plug not to
damage the shutter protecting the optical
socket.
• When storing optical cable, coil loosely.
The cable may be damaged if bent around
sharp corners.
• You can also use a standard RCA video
cable for coaxial digital connections.
Video cables
Standard RCA video cables
These cables are the most common type of
video connection and should be used to
connect to the composite video terminals. They
have yellow plugs to distinguish them from
cables for audio.
Right (red)
Analog audio cables
Left (white)
Coaxial digital audio cable Optical cable
Standard RCA video cable
VSX_815-915.book.fm 15 ページ ２００４年１２月８日 水曜日 午後４時３分