Pioneer 915 - Manual (Page 26)

Connecting up 04
26
En
Operating other Pioneer
components
Many Pioneer components have SR CONTROL
jacks which can be used to link components
together so that you can use just the remote
sensor of one component. When you use a
remote control, the control signal is passed
along the chain to the appropriate
component.
1
Note that if you use this feature, make sure that
you also have at least one set of analog audio or
video jacks connected
to another component
for grounding purposes.
Note
1 • If you want to control all your components using this receiver’s remote control, refer to Controlling the rest of your system
on page 55.
• If you have connected a remote control to the CONTROL IN jack (using a mini-plug cable), you won't be able to control this
unit using the remote sensor.
CONTROL
OUT
IN
CONTROL
OUT
IN
Receiver
Remote
control
unit
Other Pioneer products
with
CONTROL terminals
Connect to CONTROL
terminal of other
Pioneer products
VSX_815-915.book.fm 26 ページ ２００４年１２月８日 水曜日 午後４時３分