Pioneer 915 - Manual (Page 28)

Controls and displays 05
28
En
7 PHONES jack
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers.
8 LISTENING MODE buttons
STANDARD
Press for Standard decoding and to switch
between the various Pro Logic IIx and
Neo:6 options (page 34).
ADVANCED SURROUND
Use to switch between the various
surround modes
(page 35).
STEREO/DIRECT (AUTO SURR)
Switches between direct and stereo
playback. Direct playback bypasses the
tone controls and any other signal
processing for the most accurate
reproduction of a source (page 37). Also
selects the Auto Surround mode (
Auto
playback on page 34).
9 SIGNAL SELECT
Use to select an input signal (page 38).
10 VIDEO INPUT
See Connecting to the front panel video terminal
on page 21.
11 MCACC SETUP MIC jack
Use to connect the supplied microphone.
12 MASTER VOLUME dial
13 FL DIMMER
Dims or brightens the display.
14 INPUT ATT
Attenuates (lowers) the level of an analog input
signal to prevent distortion.
15 SPEAKERS
Use to change the speaker system (page 62)
and to change the impedance setting
(page 72).
16 EXTENDED MODE
Selects the surround back channel mode
(page 39) or virtual surround back mode
(page 40).
17 ACOUSTIC EQ
Press to select an Acoustic Calibration EQ
setting (page 37).
18 BAND
Switches between the tuner AM and FM bands
(page 51).
19 TUNING / STATION buttons
Selects the frequency (page 51) and station
presets (page 52) when using the tuner.
20 TUNER EDIT
Press to memorize and name a station for
recall
(page 52).
21 TONE
Press this button to access the bass and treble
controls, which you can then adjust with the
MULTI JOG dial (page 41).
22 QUICK SETUP
See Using the Quick Setup on page 11.
23 System Setup menu controls
SYSTEM SETUP
Use with the MULTI JOG dial to access the
System Setup menu (page 11, page 43,
page 66).
RETURN
Press to confirm and exit the current
menu.
VSX_815-915.book.fm 28 ページ ２００４年１２月８日 水曜日 午後４時３分