Panasonic KXL-CB30AU - Manual (Page 30)

30
Preparation
Connecting to Computer
Make sure that connection is established correctly.
# Start up your computer.
$ Connect the AC cord with AC
adaptor, then connect to the
drive.
% Insert smaller plug of the
supplied USB cable into drive
USB Connector.
& Insert bigger plug of the USB
cable into a USB Connector on
your computer.
The drive will be turned on
automatically and POWER/BUSY
Indicator (green) is lit.
(Example)
Notes:
B The drive is turned ON/OFF automatically when the computer is turned
ON/OFF.
B The drive can be turned ON/OFF automatically by connecting /
disconnecting the USB cable.
Connecting USB Cable
Cautions:
B Use only the USB cable supplied.
(Use of other cables may damage the drive and your computer.)
B Unplug the AC cord from AC outlet when the drive is not in use for a
prolonged period in order to save electricity. [When only the AC adaptor is
connected, the AC adaptor consumes only 1W (at AC 120 V) of power.]
B Connect the USB cable directly to your computer’s USB port.
We cannot guarantee connection through a USB hub.
B Do not turn off the drive when the computer is running and the drive is still
connected to the computer.
#
$
&
%
$