Panasonic WJ-HD220 - Manual (Page 29)

29
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Notes:
• When a 9-split screen is displayed, only TYPE1 24H is
available.
• If “TIME&DATE EMB.” is set to ON and a display type
except OFF is selected, the type will be embedded in
the recorded data. If OFF is selected, TYPE1 24H will
be embedded in the data.
• The embedded time and date are displayed, but the
time and date display is hidden to avoid overlapping
them when both are set to ON and a single playback is
viewed.
● Time & Date Position (TIME&DATE
POSI.)
1. Select a display position with the JogDial.
The default is R-LOWER.
R-LOWER: Displays time & date in the lower right cor-
ner.
R-UPPER: Displays time & date in the upper right cor-
ner.
L-LOWER: Displays time & date in the lower left corner.
L-UPPER: Displays time & date in the upper left corner.
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Notes:
• When the 9-split screen is displayed, the time and date
position is fixed to R-LOWER.
• The time and date display will be embedded in the
recorded data in the position specified here, if
TIME&DATE EMB. is set to ON.
● Time & Date Embedded (TIME&DATE
EMB.)
You can select either recording with time and date display
embedded or not. The display position and type in the
recorded data depend on the setups described above.
1. Select ON or OFF with the JogDial.
The default is OFF.
ON: Time & date display is embedded.
OFF: Time & date display is not embedded.
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Notes:
• TYPE1 24H will be embedded in the recorded data if
TIME&DATE DISP is set to OFF and TIME&DATE EMB.
is set to ON.
• The embedded time and date are displayed, but the
time and date display is hidden to avoid overlapping
them when both are set to ON and a single playback is
viewed.
● Status Display (STATUS DISP.)
1. Select ON or OFF with the JogDial.
The default is ON.
ON: Status display is enabled.
OFF: Status display is disabled.
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
● Status Position (STATUS POSI.)
1. Select a display position with the JogDial.
The default is R-LOWER.
PLAY PLAY
PLAY PLAY
L-UPPER
L-LOWER
R-UPPER
R-LOWER
JAN15.04 11:15:00 JAN15.04 11:15:00
JAN15.04 11:15:00 JAN15.04 11:15:00
L-UPPER
L-LOWER
R-UPPER
R-LOWER