Panasonic WJ-HD220 - Manual (Page 54)

54
Lock/Unlock Buttons
■ Password Verification
When a locked button is pressed, the key locked warning
appears on the monitor for 2 seconds, then it changes to
the password prompt.
1. Enter your five-digit password using the [CAM SELECT]
buttons (1-8). The buzzer shortly beeps once, and the
entered digit changes from "–" to " * " on the monitor.
2. The prompt window will display "KEY UNLOCKED!" for
2 seconds, and the buzzer beeps twice if the correct
password is entered.
The monitor returns to the previous display. The
recorder allows access to the front panel controls if a
button operation takes place within 5 seconds of pass-
word entry.
3. Retry verification when password error appears on the
monitor.
The recorder will exit from verification if there is no opera-
tion within 30 seconds.
PASSWORD
/ - ----
■ Enabling Button Lock
1. You need to register passwords in the SYSTEM SETUP
window prior to operating your system.
2. Press the [LOCK] button for 2 seconds.
The buzzer shortly beeps twice, and the LED in the but-
ton lights up. The "KEY LOCK DONE!" message
appears on the monitor.
Note: Set PASSWORD LOCK to OFF if you do not want
the recorder to revert to button lock mode when no
operation takes place within 5 minutes.
KEY LOCK DONE!
LOCK