Panasonic WJ-HD220 - Manual (Page 50)

50
Recording
Notes:
• When SIMUL REC&PLAY (simultaneous recording and
playback) is set to OFF in the setup, any recording will
stop playback and start the recording. Playback is
unavailable while recording.
• When set to ON, recording is available while playing
back.
• The recording rate will degrade to 15 FPS while display-
ing a quad split screen.
■ Internal Timer Recording
When INT is set for TIMER in the WJ-HD220 MAIN menu,
the presets made in the internal timer will take effect.
Internal timer recording begins when the preset start time
comes and continues until the preset end time comes. Up
to four programs, containing four events each, can be
assigned to the weekly and/or daily schedule.
Notes:
• When SIMUL REC&PLAY is set to OFF, a preset record-
ing interrupts playback and starts at the preset start
time.
• When you set both the start and end time of an event to
the same hour, the event will not be recorded.
• When planning to record all day long, set the start time
to 00:00 and the end time to 24:00 for the final event.
• When planning to record through midnight:
Set 24:00 for the end time of the final event of the day.
Set 00:00 for the start time of the initial event of the next
day.
4. To return to the all-channel list, press the button of the
selected channel (now lit) or the [MULTISCREEN
SELECT] button.
● To Search for Playback
1. Move the cursor to the desired event in the list, using
the [D] or [C] button.
2. Press the [PLAY] button to play back the recorded pic-
ture. The LED in the [PLAY] button lights up. The alarm
log on the monitor disappears.
3. Press the [STOP] button to stop playback. The alarm
log appears again on the monitor.
4. Hold down the JogDial for 2 seconds to quit the alarm
log search.
● To Erase Log
All event records can be erased.
1. Move the cursor to "PUSH
→ DATA CLEAR", then press
the JogDial.
2. Rotate the JogDial to select YES or NO.
YES: Enables the log erasure.
NO: Disables the log erasure.
3. Press the JogDial to carry out the selection.
Note: You can access pictures recorded on the disk by
time & date search even after they have been
erased.
PROG1 SETUP
NO. START END MODE
1
→ 8:00 12:20 SETO
2
→ 13:00 15:00 SETO
3
→ : :
4
→ : :