Pioneer Elite PureVision PRO 1140HD - Manual (Page 17)

17
En
Part Names 04
En
gl
is
h
Remote control unit
This section describes the button functions when the mode is
set to TV. To use the remote for controlling other equipment,
see “Using the remote control unit to control other devices”
starting on page 97.
1 TV a: Turns ON the Plasma Display Panel or
places it in Standby.
2 Transmission confirmation LED
3 INPUT: Selects an input source for the Plasma
Display Panel. (INPUT 1, INPUT 2, INPUT 3, INPUT 4,
INPUT 5, INPUT 6 and PC)
4 SCREEN SIZE: Selects the screen size.
5 SLEEP: Sets the sleep timer.
6 INFO: Displays a channel banner when a TV
program is being watched.
(When the TV Guide On Screen™ system is in
operation, information about the currently
highlighted channel appears on screen (when
available).)
7 HOME MENU: Displays the Home Menu screen
8 DAY +/–: Jumps to the next or previous day of
program listings in the TV Guide On Screen™ Listing
service.
9 / / / : Selects a desired item on the menu
screen
10 REC: When using the TV Guide On Screen™ System,
triggers recording to a connected VCR
11 FAVORITE CH (A, B, C, D):
Selects any of the four preset channels (see page 41
for details to set the FAVORITE CH)
While watching, toggle the set channels by
pressing
A, B, C and D.
12 0 – 9: Selects the channel
13 •(dot): Enters a dot
When entering the number of a sub-channel.
14 CH +/–: Selects the channel.
15 SPLIT: Switches the screen mode: 2-screen, picture-
in-picture, single-screen
16 FREEZE: Freezes a frame from a moving image.
Press again to cancel the function.
17 MTS: Selects MTS/SAP or language depending on
the program being watched
18 D: Lights up all buttons
Lights turn off if no operations are performed within
5 seconds. This is used for remote control use in
dark locations.
19 ANT: Selects the antenna (A, B) (see page 21 for
details)
20 AV SELECTION: Selects audio and video settings.
(AV mode: STANDARD, DYNAMIC, MOVIE, GAME,
PURE, USER. PC mode: STANDARD, USER)
21 DISPLAY: Displays the channel information
22 TV GUIDE: Displays the TV Guide On Screen™
system
23 ENTER: Executes a command
24 PAGE +/– (for the TV Guide On Screen™ system):
Scrolls the program listing screen vertically.
25 RETURN: Returns to the previous menu screen
26 MENU: Displays a panel menu in the TV Guide On
Screen™ system
27 CH ENTER: Executes a channel number
28 CH RETURN: Returns to the previous channel
This button is disabled while the TV Guide On
Screen™ system is displayed.
29 VOL +/–: Sets the volume
30 M MUTING: Mutes the sound
31 SHIFT: Moves the small screen to a different location
when in the picture-in-picture mode
32 SWAP: Switches between the two screens when in
the 2-screen or picture-in-picture mode
NOTE
• When using the remote control, aim it at the Plasma Display.
• See pages 90 to 100 for buttons not listed on this page.
1
10
11
13
12
14
23
24
25
5
3
4
19
18
20
21
22
7
8
9
26
15
17
16
28
27
30
29
32
31
2
6
Mode switch
(with “TV” selected)
PDP_PRO1140HD.book Page 17 Monday, June 5, 2006 5:22 PM