Pioneer Elite PureVision PRO 1140HD - Manual (Page 98)

98
En
Useful Remote Control Features 13
CBL/SAT control buttons
When the CBL/SAT function has been preset by the remote
control’s learning function, the remote control buttons
function as shown below.
• When the Mode switch is set to CBL/SAT, the cable
converter or satellite broadcast tuner connected to the
display, use the buttons shown below to operate the device
(
3, 4, 5, 8 and 9 for cable converters and 1 to 7 for satellite
tuners):
• Cable converters or satellite broadcast tuners made by other
manufacturers not listed in the system can be controlled
using the remote control if buttons
1 to 9 have already
learned the functions. See page 90.
1 SAT MENU
Displays the satellite broadcasting menu screen
2 ENTER, / / /
ENTER: Activates the selected function
/ / / : Selects items on the SAT GUIDE screen or
SAT MENU screen
3 0 – 9
Press a button (or buttons) that corresponds to the
channel that you want to watch
4 CH +/–
Selects a higher or lower channel
5 SOURCE 
Turns the device sending the image On and Off
6 SAT GUIDE
Displays the satellite broadcasting guide screen
• Set up this button with the learning function if necessary
7 RETURN
When the CBL/SAT menu is displayed, restores the
immediately previous screen
8 CH ENTER*
Enters the selected channel with the direct channel
selection buttons
9 CH RETURN*
Switches between the current channel and the previous
channel you were watching
* Some cable converter manufacturers do not preset CH
ENTER and CH RETURN. Set up these buttons with the
learning function if necessary.
NOTE
• CABLE and SAT cannot be selected at the same time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
4
8
7
6
3
5
2
1
9
Mode switch
(with “CBL/SAT”
selected)
PDP_PRO1140HD.book Page 98 Monday, June 5, 2006 5:22 PM