Vcr control buttons, Useful remote control features 13 – Pioneer Elite PureVision PRO 1140HD User Manual
Page 99
99
En
Useful Remote Control Features
13
En
gl
is
h
VCR control buttons
When the VCR is preset by the remote control’s learning
function, the remote control buttons function as follows:
(
Mode switch must be set to VCR).
• Press the input selector button (INPUT 1–6) that matches
the input terminal connected to the VCR. The VCR can be
operated using
1 to 8.
• VCRs made by manufacturers not listed in the system can be
controlled using the remote control if buttons
1 to 8 have
learned the functions. See page 90.
1
CH +/–
Selects the channel on the VCR
2
(PLAY)
Selects playback
3
(RWD)
Rewinds the tape and allows picture search
4
SOURCE
Turns the power of the VCR On and Off
5
(PAUSE/STILL)
Pauses playback and displays still pictures
6
(FF)
Rapidly advances the tape and allows picture search
7
(REC)
Starts recording
8
(STOP)
Stops tape transport
NOTE
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
1
4
3
7
6
8
5
2
Mode switch
(with “VCR”
selected)
PDP_PRO1140HD.book Page 99 Monday, June 5, 2006 5:22 PM