Pioneer Elite PureVision PRO 1140HD - Manual (Page 56)

56
En
Adjustments and Settings 11
Basic picture adjustments
Adjust the picture to your preference unless DYNAMIC was
selected. The DYNAMIC setting automatically adjusts the
image.
1
Press HOME MENU.
2
Select “Picture”. ( / then ENTER)
3
Select an item to be adjusted. ( / then ENTER)
4
Select the desired level. ( / )
• When an adjustment screen is displayed, you can also
press / to change the item to be adjusted.
5
Press HOME MENU to exit the menu.
For AV source
For PC source
For PC source, the following screen appears:
NOTE
• To perform advanced picture adjustments, select “Pro
Adjust” in step 3 then press ENTER. For the subsequent
procedures see “Advanced picture adjustments” on page 57.
• To restore the factory defaults for all items, press / to
highlight “Reset” in step 3 then press ENTER. A confirmation
screen appears. Press / to select “Yes” then press
ENTER.
Item button button
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Color For less color intensity For more color intensity
Tint Skin tones become
purplish Skin tones become
greenish
Sharpness For less sharpness For more sharpness
Item button button
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Red For weaker red For stronger red
Green For weaker green For stronger green
Blue For weaker blue For stronger blue
Picture
AV Selection
Contrast
Brightness
Color
Tint
Sharpness
Pro Adjust
Reset
STANDARD
40
0
0
0
0
Contrast 40
Picture
AV Selection
Contrast
Brightness
Red
Green
Blue
Reset
STANDARD
40
0
0
0
0
PDP_PRO1140HD.book Page 56 Monday, June 5, 2006 5:22 PM