Pioneer Elite PureVision PRO 1140HD - Manual (Page 54)

54
En
TV Guide On Screen™ System Operation 10
3
Press / to highlight a channel then press ENTER to go
to the Grid Options menu.
From the Grid Options menu you can set:
• channel – On (display in channel list), Off (don’t display)
or Auto Hide (hide when no program information is
available)
• service – the type of service that the channel operates
on (cable, etc.)
• tune channel – the channel number that the channel
listing is tuned to
• position – place that the channel appears in the
channel list
4
After making all selections for the channel, highlight
“done” then press
ENTER.
• To cancel without saving the changes, select “cancel”.
Changing the Default Options
The menu provides options to change the default settings for
recordings, reminders, and other general settings.
1
Select the “Change Default Options” item.
2
Select a default option category.
A different panel menu appears for each option.
General default options
• box size – the initial size of the Info Box (no, small,
large, last used)
• box cycle – the cycle behavior of the Info Box (no only, small
only, large only, no & small, no & large, small & large, all)
• auto guide – Display TV Guide On Screen™ guide
automatically when you turn on the TV
Record defaults
•
start – when to start a recording (up to 120 minutes earlier
or later than the program start time, or On time)
• end – when to end a recording (up to 120 minutes earlier or
later than the program end time, or On time)
• recorder – selects a recorder to be used for recording.
Remind defaults
•
auto tune – automatically tunes to the correct channel
when a reminder becomes due (Yes or No)
• when – set the display time for the reminder (15 minutes
early to 15 minutes late, or On time)
3
When the settings are complete, highlight “done” then
press
ENTER.
• To cancel without saving the changes, select “cancel”.
PDP_PRO1140HD.book Page 54 Monday, June 5, 2006 5:22 PM