POSIFLEX Business Machines PP3000 - Manual (Page 15)

(the thinner spacer for 3” and the thicker for 2.25” both with the flat side
facing inward) and put the whole assembly onto the roll paper shaft holder
(ref. Fig. 8).
• Insert the top edge of the paper into the paper cut slot, then mount the top
cover by reversing the procedure for removing the top cover in previous
steps (ref. Fig. 9).
Lock lever (right)
Paper guide (left)
Fig. 7 Grooves on paper guide shaft
PP3000 Series User’s Manual 2 - 7