POSIFLEX Business Machines PP3000 - Manual (Page 51)

Reference Epson Models Emulated
EPSON TM-300 series.
Character Size/Font Matrices
Refer to page 5 - 4, the 8 CPI character size (5 x 9 pulse 3 full dot mode)
is not applicable for EPSON emulation.
Unsupported Control Codes:
Following EPSON control codes are not supported in PP-300E series due
to hardware difference:
Control Codes Function
ESC < Return home
ESC c 3 Select paper sensor(s) for “paper-out” output signal
ESC c 4 Select paper sensor(s) to stop printing
ESC i Partial cut (leave 1 point)
ESC m Partial cut (leave 3 points)
ESC r Select print color
Supported Control Codes:
NOTES:
c Default character spacing for 7 x 9 font is 3 dots, for 5 x 9 is 2 dots. These
values are the minimum settings. In 5 x 9 font, no odd number spacing is
allowed, or it will be automatically decreased.
d Font select: 1 ⇒ 7 x 9; 0⇒ 5 x 9.
e 7 x 9 font is recommended in defining user-define characters. When original
9 x 9 characters are downloaded under 5 x 9 font printing mode, the
characters will be automatically transferred to 5 x 9 by removing the half-dot
bits.
f Internatioal character n in hex code:
<00>
⇒USA, <01>⇒France, <02>⇒Germany, <03>⇒England,
<04>
⇒Denmark, <05>⇒Sweden, <06>⇒Italy, <07>⇒Spain,
<08>
⇒Japan, <09>⇒Norway, <0A>⇒Denmark II, <0B>⇒Croatia.
g Character table n in hex code:
<00>
⇒USA&Europe, <01>⇒IBM 1, <02>⇒IBM 2, <03>⇒JAPAN.
hThese control codes are applicable in serial interface only.
PP3000 Series User’s Manual 7 - 5