POSIFLEX Business Machines PP3000 - Manual (Page 42)

POWER SUPPLY
PIN ASSIGNMENT OF 3 PIN JACK:
PIN DEFINITION
1 +24 V
2 GND
3 N.C.
CASE CHASSIS
GND
2
CASE
1
3
Fig. 18 Pin layout of power plug
+
IMPORTANT: To unplug this connector, one should pull the outer sleeve of
the power plug instead of pulling the power cable itself. This connector is
equipped with a lock mechanism, pulling the cable itself without unlocking by
pulling the sleeve will cause certain damage to the connector.
OPTION LIST
• Inked ribbon cartridge
• Paper roll
FONT MATRICES
The printed format of the fonts used is determined by the character size
which is defaulted as 15 CPI yet can be changed to 12 CPI or 8 CPI through
command received by the printer. The font format and dimension definition of
each character size is given in Fig.19 and Fig. 20.
D
F
E
A
C
B
C
A
B
F
D
E
Fig. 19 Font format for 15 CPI Fig. 20 Font format for 12 CPI and 8 CPI
PP3000 Series User’s Manual 5 - 4