Panasonic DMR-EZ37V - Manual (Page 15)

15
RQT8849
Important:
Formatting permanently deletes all disc contents
(including computer data), regardless of protection status
of disc.
[RAM] [-RW‹V›] [+RW]
The following screen may
appear when inserting a new
disc, etc.
Only format the disc if you
intend to use it for recording.
Do not format if you intend to
view pre-recorded material from the disc.
 to select “Yes”, then
ENTER
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
Finalize
Finalizing is necessary to enable playback
of the disc on compatible DVD players.
Once finalized, recordings cannot be added to the disc.
It will take approximately
n minutes. Start?
this unit. You can Finalize it later.
Press “REC” to start finalizing.
Press the OPEN/CLOSE button to postpone
finalizing. The disc can be played only on
After recording, if you
press [
 OPEN/CLOSE]
to eject the disc, the
following screen may
appears.
REC
to start fi nalizing.
or
OPEN/CLOSE to eject the disc without
fi nalizing.
When the format confi rmation screen is
displayed
When removing a Recorded Disc
Notes
You cannot stop fi nalizing once you have started it.
Tips
 If you want to provide the disc with a name or set play menu
select, select “Disc Name” ( 36) or “Playback will start with:”
( 38) in “DVD Management” before fi nalizing.
 Refer to “Finalizing” ( 38) for more detail of fi nalizing.
Tips
Refer to “Formatting Discs” ( 37) for more detail of formatting.
Ad
v
anced Features
Selecting Audio Channels to record
AUDIO
to select the audio.
Stereo  SAP  Mono

Changing during recording changes the recorded sound.
Stereo: Main audio (stereo)
If the broadcast is “Mono SAP”, audio will be monaural
even if you select Stereo mode.
SAP: Secondary audio program (SAP).
When you record SAP, main audio is also recorded. In
such cases, recorded SAP and main audio become
monaural.
Mono: Main audio (monaural).
Select “Mono” if reception is poor during a stereo
broadcast.
e.g., “Stereo” is selected
“((” appears when the unit is receiving
the audio type you selected.
CH 12
DVD-RAM
Stereo ((
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Select the audio (Main or SAP) in “Multi-channel TV
Sound (Analog)” in the Setup menu ( 42).
[RAM]
Notes
 You cannot change the audio type in the following case.
− When there is no choice of languages in a digital broadcast
 Before scheduled recording a digital broadcast with more than one
language channel, set the language in “Audio Language Setting”
in the Setup menus ( 40).
 When broadcast offers no language data, such displays as
“Audio 1 of 3” may appear. In such cases, recording may not be
possible in the language selected through the “Audio Language
Setting” in the Setup menu.
AUDIO
to select the audio.
When receiving an analog broadcast
When receiving a digital broadcast
e.g., “English” is selected
CH 12
DVD-RAM
English
Notes
You cannot change the audio type in the following case.
− While a disc other than DVD-RAM is inserted when selecting an
analog broadcast