Panasonic DMR-EZ37V - Manual (Page 67)

67
RQT8849
Ref
erence
Use this function to synchronize the codes for the
remote control and the main unit when there are other
Panasonic products close to your unit.
,  to select “Other Functions”,
then
ENTER
,  to select “Setup”,
then
ENTER
,  to select “Remote Control
Code”, then
ENTER
,  to select “Set Code 1”, “Set
Code 2”, or “Set Code 3” then
ENTER
to set.
While pressing and holding ENTER ,
press and hold the numbered button
1 , 2 , or 3 corresponding to
the code set in step 6 for about
5 seconds to set.
When the following indicator appears on the unit’s
display
– Change the code on the remote control to match the
code displayed for the main unit ( step 7).
With the unit stopped
To Reset This Unit
To reset the channel information and the
clock settings
On the main unit
CH CH
Press and hold both buttons
for about 5 seconds.
To reset the ratings level settings
With the unit stopped
OPEN/CLOSE
to open the disc tray.
On the main unit
REC
Press and hold both buttons for
about 5 seconds.
To restore the unit if it freezes
On the main unit
POWER Press and hold for more than
10 seconds.
–The unit is off.
or
On the main unit
RESET
Press and hold for
more than 1 second
with a pointed object.
Tips
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
,  to select “Setup”,
then .
ENTER
to complete.
You can reset both parental rating ( 44) and
DVD-Video rating ( 41).
When Other Panasonic Products
Respond to this Remote Control